Description
Based on special vegetable oils and solvents to give a clear penetrating seal & finish to Teak, Cedar and other bare woods to nourish interior and exterior wood.
Teak Oil
$32.50
Additional information
| Weight | N/A |
|---|---|
| APPLICATION | Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Teak Oil is formulated for application directly, and does not require thinning. |
| FIRST COAT | Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 10-12 hours in warm, dry well ventilated conditions, or preferably overnight. |
| SECOND COAT | Apply as first coat, THINLY, allowing good ventilation. Leave to dry 10-12 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. Apply 3 coats to new interior timber, and 4 coats to exterior timber. Clean applicators with White Spirit. |
| RENOVATION | To renovate previous application of Teak Oil, lightly sand area with 150 grit sandpaper, and re-apply. |
| MAINTENANCE | For regular light maintenance, clean with a damp cloth and wipe dry. Re-application may be necessary where soiling or staining is apparent, following the application details above. |
| COVERAGE | A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate. |
| PACKAGING | 1lt |
