Light Fast Water Stains

$14.00$35.00

How Much do I need? +

*Single Coat depending on substrate

Clear
SKU: N/A Categories: ,

Description

A range of Light Fast Water Stains, formulated to offer exceptional ease of use, combined with an unparalleled, uniform depth of colour for use on all interior wood surfaces.

Fiddes Light Fast Water Stains are ideal for use under Fiddes complete range of woodfinishes, can be hand or spray applied and offers a clean, consistent appearance combined with excellent light fast properties.

Colour / Shades

White Tint
Mahogany
White Tint
Light Oak
White Tint
Dark Oak
White Tint
Teak
White Tint
Walnut
White Tint
Red Mahogany

 

Primary Light Fast Concentrates also available in:

White Tint
Red
White Tint
Orange
White Tint
Brown
White Tint
Yellow
White Tint
Black
White Tint
Green
White Tint
Blue

Additional information

Weight N/A
Preparation

A range of Light Fast Water Stains, formulated to offer exceptional ease of use, combined with an unparalleled, uniform depth of colour for use on all interior wood surfaces.

Fiddes Light Fast Water Stains are ideal for use under Fiddes complete range of woodfinishes, can be hand or spray applied and offers a clean, consistent appearance combined with excellent light fast properties.
Preparation

Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to application of Fiddes Wood Dyes. Take care to remove all traces of sanding dust and test the chosen Fiddes Wood Dye on a similar substrate to verify colour / shade.

Stir the contents well and always check the shade before application

Application

Take a clean, lint free cotton cloth or sponge and apply in the direction of the wood grain where possible. Take care to remove any excess stain immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. To obtain a uniform colour, always wipe evenly, blending the stain over the whole surface area by exerting a degree of pressure when applying by hand. Leave to dry, and do not sand between coats. The application of additional coats will deepen the existing colour / shade.

Dry Time

1 hour at room temperature.

Coverage

16 sqm per Litre (depending on substrate and method of application)

Coats

1 coat – further coats will deepen colour / shade.

Thinners

Water

Packaging

1lt, 250ml

Color/Shade

Antique Pine, Medium Pine, Mahogany, Light Oak, Medium Oak, Dark Oak, Teak, Walnut, Dark Pine, Red Mahogany

You may also like…