Mellow Wax Range


How Much do I need? +

*Single Coat depending on substrate

SKU: N/A Categories: ,


Fiddes Mellow Wax range is formulated from a traditional recipe, developed from over ninety years experience in the manufacture of fine woodfinishes.

A blended beeswax polish of the highest quality, Fiddes Mellow Wax Polish is available in 5 distinctive wood shades, and have been successfully used for finishing sealed or previously polished wood for nearly a generation.

White Tint
White Tint
English Oak
White Tint
Georgian Mahogany
White Tint
Rich Mahogany
White Tint

Additional information

Weight N/A

For use on previously finished or sealed wood. Ensure all surfaces are free from dust or blemishes before application of Fiddes Mellow Wax Polish.

Ideal Application

Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Mellow Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Mellow Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.

Leave to dry for around 10 minutes, and buff to finish with a soft cloth.

The application of additional coats will deepen the existing colour / shade and significantly enhance the resulting sheen level.


Cloth, Brush, Sponge.

Dry Time

10 minutes at room temperature.


16 sqm per Litre (depending on substrate and method of application)


1 coat – further coats will deepen colour / shade and enhance sheen level


White Spirit / Pure Turpentine


400ml, 5lt, containers.


English Oak, Geogian Mahogany, Rich Mahogany, Jacobean, Light (Clear)

You may also like…