Nitro Floor Stains


How Much do I need? +

*Single Coat depending on substrate

SKU: N/A Categories: ,


A range of penetrating oil based stains, specifically formulated for application onto wooden flooring. Ideal under Hard Wax Oil.

White Tint
White Tint
White Tint
White Tint
Light Oak
White Tint
Dark Oak
White Tint
White Tint
Kenilworth Oak
White Tint
Light Victorian

Additional information

Weight N/A

Sand the wooden substrate in stages, working with a medium sandpaper ( 120 grit ), through to a medium / fine grade ( 180 –220 grit ). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Wood Dyes. Take care to remove all traces of sanding dust and test the chosen Fiddes Wood Dye on a similar substrate to verify colour / shade.


Take a clean, lint free cotton cloth or sponge and apply in the direction of the wood grain where possible. Take care to remove any excess stain immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. To obtain a uniform colour, always wipe evenly, blending the stain over the whole surface area by exerting a degree of pressure when applying by hand. Leave to dry, and do not sand between coats.

dry time

6-8 hours at room temperature


14 sqm per Litre ( depending on substrate and method of application )


1 coat – further coats will deepen colour / shade


Nitro Thinners



Finishes / Shades

Mahogany, Walnut, Teak, Light Oak, Medium Oak, Dark Oak, Kenilworth Oak, Honey, Light Victorian